• 1 Channel 5V Relay Module – With Optocoupler

    It is a 5V 1 Channel With optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.

    159.00 Incl Tax
  • 1 Channel 5V Relay Module – Without Optocoupler

    It is a 5V 1 Channel Without optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.

    129.00 Incl Tax
  • 12V DC Cooling Fan

    The 12V Cooling Fan for 3D Printer is Small but powerful exhaust cooling is designed for the 3D printer. It has a two-pin connector to connect in a printer controller. Fan operates at 12V supply and operates automatically by the Printer controller system. It is used to mount on extruders to maintain the temperature of an extruder for seamless printing.

    140.00 Incl Tax

    12V DC Cooling Fan

    140.00 Incl Tax
  • 12V DC Power Adapter

    The best quality and durable power adapter. 12V Power Supply with 5.5mm DC Plug Adapter is 2 pin EU plug type adapter and 1.2 meters long connecting cable. These adapters are designed to meet all types of power requirements for any type of electronic components. (Available in two current variant 1A and 2A).

    159.00210.00 Incl Tax

    12V DC Power Adapter

    159.00210.00 Incl Tax
  • 12V DC Sprayer Motor High Performance/Diaphragm Water Pump

    12V DC Battery Operated, Sprayer Motor High Performance/Diaphragm Water Pump Diaphragm Water Pump  (0.04 hp). Currnt input 2-3A, and DC 12V.

    599.00 Incl Tax
  • 16×2 LCD Display Module – Blue Back Light

    02

    If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 Parallel LCD Display is a quite good solution. This is an LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast black text upon a blue background/backlight.

    202.00 Incl Tax
  • 16×2 LCD Display Module – Green Back Light

    01

    If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 Parallel LCD Display is a quite good solution. This is an LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast black text upon a green background/backlight.

    220.00 Incl Tax
  • 16×2 LCD Display With IIC/I2C Interface

    If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 LCD Display with IIC/I2C interface is a quite good solution. This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.

    275.00 Incl Tax
  • 2 Channel Relay Module – 5V Dual Channel Relay

    This is a 2 Channel (Dual channel) isolated 5V 10A relay module Optocoupler for Arduino, PIC, ARM. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This relay has a 1×4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.

    180.00 Incl Tax
  • 2 Motors Metal Chassis

    2 Wheel Metal Chassis is powder-coated Metal chassis for robots. Easy to mount the motors on the place by using normal motor mount nut. It is compatible with a centre Shaft Gear motor and BO Motor. This Chassis board is widely used as a  mechanical frame structure of the mobile robots. It is the backbone of the robot, where we arrange and connect everything like BO Motors, sensors, and BO Wheels.

    120.00 Incl Tax

    2 Motors Metal Chassis

    120.00 Incl Tax
  • 25 Watt Siron Soldering Iron – Normal Tip

    This is 25-watt soldering Iron. If you are a student or hobbyist and you are looking for a good general-purpose Soldering Iron then this 25-watt soldering Iron is perfect for you.

    250.00 Incl Tax

Menu Section

Delhivery Shipping Service

Your tracking ID will be sent to your registered email address and via SMS. You can also use your order ID for tracking.

Shiprock Shipping Service

Your shipment details will be sent to your registered email and SMS or use your Order ID to track the live status of your shipment.