No products in the cart.
New Arrival
MT3608 2A Max DC-DC Step Up Power Module
The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
₹60.00 Incl TaxMT3608 2A Max DC-DC Step Up Power Module
₹60.00 Incl TaxArduino UNO Clone – Without Cable
The Arduino Uno clone without cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Buy with USB CableBuy with USB Cable.
₹460.00₹499.00Incl Tax 8% offArduino UNO Clone – Without Cable
₹460.00₹499.00Incl Tax 8% off
Arduino UNO Clone – With USB Cable
The clone Arduino Uno with Cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to power with an AC-to-DC adapter or battery to get started.
Overview:
- Microcontroller: atmega328.
- Operating Voltage: 5V.
- Input Voltage (Vin) : 7-12V.
₹499.00₹699.00Incl Tax 29% offArduino UNO Clone – With USB Cable
₹499.00₹699.00Incl Tax 29% offHC-SR04-Ultrasonic Ranging Sensor
This HC-SR04-Ultrasonic Range Finder is a very popular sensor which is found in many applications where it requires to measure distance and detect the objects. The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver. The HC-SR04 ultrasonic sensor uses sonar to determine the distance to an object like bats and dolphins do.
₹99.00₹110.00Incl Tax 10% offHC-SR04-Ultrasonic Ranging Sensor
₹99.00₹110.00Incl Tax 10% off
NodeMCU ESP8266 WiFi Development Board
NodeMcu ESP8266 Wifi development board is an edge low-cost WiFi technology. Modern high-level mature LUA based technology. It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board with I/O pins available. (Programmable with Arduino IDE)
₹399.00 Incl TaxNodeMCU ESP8266 WiFi Development Board
₹399.00 Incl Tax
1 Channel 5V Relay Module – With Optocoupler
It is a 5V 1 Channel With optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
₹125.00 Incl Tax1 Channel 5V Relay Module – With Optocoupler
₹125.00 Incl TaxArduino Nano Clone – Without Cable
The Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality as the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. It can be power via the mini-USB connection, 6-20V unregulated external power supply, or 5V regulated external power supply. The power source is automatically selected to the highest voltage source.
₹310.00₹399.00Incl Tax 22% offArduino Nano Clone – Without Cable
₹310.00₹399.00Incl Tax 22% off- ₹79.00 Incl Tax
Jumper Cables 30 Pcs Set | F-F | F-M | M-M
₹79.00 Incl Tax 
IR Sensor Module (Infrared Sensor)
IR Sensor module has the great adaptive capability of the ambient light, having a pair of an infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the on-board LED lights up.
₹49.00 – ₹89.00 Incl TaxIR Sensor Module (Infrared Sensor)
₹49.00 – ₹89.00 Incl Tax
MT3608 2A Max DC-DC Step Up Power Module
The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
₹60.00 Incl TaxMT3608 2A Max DC-DC Step Up Power Module
₹60.00 Incl Tax
LM7805 Linear Voltage Regulator – 5V With Heat Sink
IC’s, the 7805 Voltage Regulator IC, is a regulated power supply essential for several electronic devices. Due to the semiconductor material used in them having a fixed rate of current and voltage. The device may get damaged if there is any difference from the fixed rate.
₹59.00 Incl TaxLM7805 Linear Voltage Regulator – 5V With Heat Sink
₹59.00 Incl Tax
3.3V/5V MB102 Dual Breadboard Power Supply Module
This is a 3.3V/5V MB102 Breadboard Power Supply Module, which provides dual 5 V and 3.3 V power rails and has a multi-purpose female USB socket. The 3.3V/5V MB102 Breadboard Power Supply Module securely fits in a standard 400 or 800 tie points breadboard. It also features reverse polarity protection. The module can take 6.5V to 12V input and can produce 3.3V and +5V.
₹150.00 Incl Tax3.3V/5V MB102 Dual Breadboard Power Supply Module
₹150.00 Incl Tax- ₹79.00 Incl Tax
Jumper Cables 30 Pcs Set | F-F | F-M | M-M
₹79.00 Incl Tax 
12V DC Sprayer Motor High Performance/Diaphragm Water Pump
12V DC Battery Operated, Sprayer Motor High Performance/Diaphragm Water Pump Diaphragm Water Pump (0.04 hp). Currnt input 2-3A, and DC 12V.
₹499.00 Incl Tax12V DC Sprayer Motor High Performance/Diaphragm Water Pump
₹499.00 Incl Tax
PL2303HX USB to TTL Serial UART Converter Module
This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with a high-speed 500mA self-recovery fuse for protection. Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin interface, easy for DDWRT of different voltage system that needs power. The entire board is coated by a high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside, so that the board won’t be burnt down by a material shortcut.
₹115.00 Incl TaxPL2303HX USB to TTL Serial UART Converter Module
₹115.00 Incl Tax
Digital Multimeter – DT830D 1000V DC & 750V AC
Digital Multimeter with 1M Ohm Impedance is Standard Diagnostic Tool to Measure Two or More Electrical Values Such as Voltage, Current and Resistance. It uses digital and logic technology using integrated circuit technology to offer additional test capabilities. They are Widely Used in electrical measurements, AC and DC voltage, AC and DC current, and resistance, voltmeter, ammeter, and ohmmeter, voltages and voltage fluctuations in homes or offices.
₹250.00 Incl TaxDigital Multimeter – DT830D 1000V DC & 750V AC
₹250.00 Incl Tax
Bracket For HC SR-04 – Black
Bracket for HC-SR04 Ultrasonic sensor. It is simple, compact, light-weight and provides more rigidity than most. This module Only suitable for HC-SR04. This Bracket has a flexible arm and there is no need for any screws to fit the sensor. It fits the HC-SR04 ultrasonic sensor perfectly.
₹89.00 Incl TaxBracket For HC SR-04 – Black
₹89.00 Incl Tax
Raspberry Pi 4 – Full Kit (4GB RAM)
Raspberry Pi 4 Model B 4GB Ram Starter Kit contains Raspberry Pi 4 Model B 4GB Ram Board and all the accessories available for it. It is specially designed for the users to get more benefits and at a cheaper price. It is the best kit for anyone who is starting out working on the Raspberry Pi 4 Model B 4GB Ram version.
₹6,499.00 Incl TaxRaspberry Pi 4 – Full Kit (4GB RAM)
₹6,499.00 Incl Tax
