No products in the cart.
New Arrival
MT3608 2A Max DC-DC Step Up Power Module
The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
₹60.00 Incl TaxMT3608 2A Max DC-DC Step Up Power Module
₹60.00 Incl TaxArduino UNO Clone – Without Cable
The Arduino Uno clone without cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Buy with USB CableBuy with USB Cable.
₹460.00₹499.00Incl Tax 8% offArduino UNO Clone – Without Cable
₹460.00₹499.00Incl Tax 8% off
Arduino UNO Clone – With USB Cable
The clone Arduino Uno with Cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to power with an AC-to-DC adapter or battery to get started.
Overview:
- Microcontroller: atmega328.
- Operating Voltage: 5V.
- Input Voltage (Vin) : 7-12V.
₹499.00₹699.00Incl Tax 29% offArduino UNO Clone – With USB Cable
₹499.00₹699.00Incl Tax 29% offHC-SR04-Ultrasonic Ranging Sensor
This HC-SR04-Ultrasonic Range Finder is a very popular sensor which is found in many applications where it requires to measure distance and detect the objects. The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver. The HC-SR04 ultrasonic sensor uses sonar to determine the distance to an object like bats and dolphins do.
₹99.00₹110.00Incl Tax 10% offHC-SR04-Ultrasonic Ranging Sensor
₹99.00₹110.00Incl Tax 10% off
NodeMCU ESP8266 WiFi Development Board
NodeMcu ESP8266 Wifi development board is an edge low-cost WiFi technology. Modern high-level mature LUA based technology. It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board with I/O pins available. (Programmable with Arduino IDE)
₹399.00 Incl TaxNodeMCU ESP8266 WiFi Development Board
₹399.00 Incl Tax
1 Channel 5V Relay Module – With Optocoupler
It is a 5V 1 Channel With optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
₹125.00 Incl Tax1 Channel 5V Relay Module – With Optocoupler
₹125.00 Incl TaxArduino Nano Clone – Without Cable
The Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality as the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. It can be power via the mini-USB connection, 6-20V unregulated external power supply, or 5V regulated external power supply. The power source is automatically selected to the highest voltage source.
₹310.00₹399.00Incl Tax 22% offArduino Nano Clone – Without Cable
₹310.00₹399.00Incl Tax 22% off- ₹79.00 Incl Tax
Jumper Cables 30 Pcs Set | F-F | F-M | M-M
₹79.00 Incl Tax 
IR Sensor Module (Infrared Sensor)
IR Sensor module has the great adaptive capability of the ambient light, having a pair of an infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the on-board LED lights up.
₹49.00 – ₹89.00 Incl TaxIR Sensor Module (Infrared Sensor)
₹49.00 – ₹89.00 Incl Tax
1 Channel 5V Relay Module – With Optocoupler
It is a 5V 1 Channel With optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
₹125.00 Incl Tax1 Channel 5V Relay Module – With Optocoupler
₹125.00 Incl Tax
1 Channel 5V Relay Module – Without Optocoupler
It is a 5V 1 Channel Without optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
₹99.00 Incl Tax1 Channel 5V Relay Module – Without Optocoupler
₹99.00 Incl Tax
12V DC Cooling Fan
The 12V Cooling Fan for 3D Printer is Small but powerful exhaust cooling is designed for the 3D printer. It has a two-pin connector to connect in a printer controller. Fan operates at 12V supply and operates automatically by the Printer controller system. It is used to mount on extruders to maintain the temperature of an extruder for seamless printing.
₹140.00 Incl Tax12V DC Cooling Fan
₹140.00 Incl Tax
12V DC Power Adapter
The best quality and durable power adapter. 12V Power Supply with 5.5mm DC Plug Adapter is 2 pin EU plug type adapter and 1.2 meters long connecting cable. These adapters are designed to meet all types of power requirements for any type of electronic components. (Available in two current variant 1A and 2A).
₹159.00 – ₹210.00 Incl Tax12V DC Power Adapter
₹159.00 – ₹210.00 Incl Tax
12V DC Sprayer Motor High Performance/Diaphragm Water Pump
12V DC Battery Operated, Sprayer Motor High Performance/Diaphragm Water Pump Diaphragm Water Pump (0.04 hp). Currnt input 2-3A, and DC 12V.
₹499.00 Incl Tax12V DC Sprayer Motor High Performance/Diaphragm Water Pump
₹499.00 Incl Tax
16×2 LCD Display Module – Blue Back Light
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 Parallel LCD Display is a quite good solution. This is an LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast black text upon a blue background/backlight.
₹202.00 Incl Tax16×2 LCD Display Module – Blue Back Light
₹202.00 Incl Tax
16×2 LCD Display Module – Green Back Light
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 Parallel LCD Display is a quite good solution. This is an LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast black text upon a green background/backlight.
₹220.00 Incl Tax16×2 LCD Display Module – Green Back Light
₹220.00 Incl Tax
16×2 LCD Display With IIC/I2C Interface
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 LCD Display with IIC/I2C interface is a quite good solution. This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.
₹275.00 Incl Tax16×2 LCD Display With IIC/I2C Interface
₹275.00 Incl Tax
2 Channel Relay Module – 5V Dual Channel Relay
This is a 2 Channel (Dual channel) isolated 5V 10A relay module Optocoupler for Arduino, PIC, ARM. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This relay has a 1×4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays.
₹170.00 Incl Tax2 Channel Relay Module – 5V Dual Channel Relay
₹170.00 Incl Tax
2 Motors Metal Chassis
2 Wheel Metal Chassis is powder-coated Metal chassis for robots. Easy to mount the motors on the place by using normal motor mount nut. It is compatible with a centre Shaft Gear motor and BO Motor. This Chassis board is widely used as a mechanical frame structure of the mobile robots. It is the backbone of the robot, where we arrange and connect everything like BO Motors, sensors, and BO Wheels.
₹120.00 Incl Tax2 Motors Metal Chassis
₹120.00 Incl Tax
