No products in the cart.
New Arrival
MT3608 2A Max DC-DC Step Up Power Module
The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
₹60.00 Incl TaxMT3608 2A Max DC-DC Step Up Power Module
₹60.00 Incl TaxArduino UNO Clone – Without Cable
The Arduino Uno clone without cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Buy with USB CableBuy with USB Cable.
₹460.00₹499.00Incl Tax 8% offArduino UNO Clone – Without Cable
₹460.00₹499.00Incl Tax 8% off
Arduino UNO Clone – With USB Cable
The clone Arduino Uno with Cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to power with an AC-to-DC adapter or battery to get started.
Overview:
- Microcontroller: atmega328.
- Operating Voltage: 5V.
- Input Voltage (Vin) : 7-12V.
₹499.00₹699.00Incl Tax 29% offArduino UNO Clone – With USB Cable
₹499.00₹699.00Incl Tax 29% offHC-SR04-Ultrasonic Ranging Sensor
This HC-SR04-Ultrasonic Range Finder is a very popular sensor which is found in many applications where it requires to measure distance and detect the objects. The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver. The HC-SR04 ultrasonic sensor uses sonar to determine the distance to an object like bats and dolphins do.
₹99.00₹110.00Incl Tax 10% offHC-SR04-Ultrasonic Ranging Sensor
₹99.00₹110.00Incl Tax 10% off
NodeMCU ESP8266 WiFi Development Board
NodeMcu ESP8266 Wifi development board is an edge low-cost WiFi technology. Modern high-level mature LUA based technology. It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board with I/O pins available. (Programmable with Arduino IDE)
₹399.00 Incl TaxNodeMCU ESP8266 WiFi Development Board
₹399.00 Incl Tax
1 Channel 5V Relay Module – With Optocoupler
It is a 5V 1 Channel With optocoupler. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1-channel relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical.
₹125.00 Incl Tax1 Channel 5V Relay Module – With Optocoupler
₹125.00 Incl TaxArduino Nano Clone – Without Cable
The Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality as the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. It can be power via the mini-USB connection, 6-20V unregulated external power supply, or 5V regulated external power supply. The power source is automatically selected to the highest voltage source.
₹310.00₹399.00Incl Tax 22% offArduino Nano Clone – Without Cable
₹310.00₹399.00Incl Tax 22% off- ₹79.00 Incl Tax
Jumper Cables 30 Pcs Set | F-F | F-M | M-M
₹79.00 Incl Tax 
IR Sensor Module (Infrared Sensor)
IR Sensor module has the great adaptive capability of the ambient light, having a pair of an infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the on-board LED lights up.
₹49.00 – ₹89.00 Incl TaxIR Sensor Module (Infrared Sensor)
₹49.00 – ₹89.00 Incl Tax
BO Motor Wheel – Small Width
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon-reinforced plastic rim. Colour: Green.
₹49.00 Incl TaxBO Motor Wheel – Small Width
₹49.00 Incl TaxIR Sensor Module (Infrared Sensor)
IR Sensor module has the great adaptive capability of the ambient light, having a pair of an infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the on-board LED lights up.
₹49.00 – ₹89.00 Incl TaxIR Sensor Module (Infrared Sensor)
₹49.00 – ₹89.00 Incl Tax
Motor Mounting Clamp – BO Motors (Pack Of 2)
It is a Mounting Clamp for BO Motor. This is used for fixing the motor to the chassis. It is made from MS steel and has a thickness of 1mm. Very useful for DIY bot building.
₹50.00 Incl TaxMotor Mounting Clamp – BO Motors (Pack Of 2)
₹50.00 Incl Tax
Female Berg Strip (40 Pins) Pack of 2
This is 40 pins single row female berg strip/header. It can be cut into any desired sizes with the wire cutter. The pitch for this header is standard 2.0mm.
₹50.00 Incl TaxFemale Berg Strip (40 Pins) Pack of 2
₹50.00 Incl Tax
Male Berg Strip (40 Pins) Pack of 2
This is 40 pins single row male berg strip/header. It can be cut into any desired sizes with the wire cutter. The pitch for this header is standard 2.0mm.
₹50.00 Incl TaxMale Berg Strip (40 Pins) Pack of 2
₹50.00 Incl Tax
TTP223 Capacitive Touch Key Sensor (Pack of 2)
The TTP223 Touch Key Module is based on a touch-sensing IC (TTP223) capacitive touch switch module. A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm.
₹50.00 Incl TaxTTP223 Capacitive Touch Key Sensor (Pack of 2)
₹50.00 Incl Tax
LM7805 Linear Voltage Regulator – 5V With Heat Sink
IC’s, the 7805 Voltage Regulator IC, is a regulated power supply essential for several electronic devices. Due to the semiconductor material used in them having a fixed rate of current and voltage. The device may get damaged if there is any difference from the fixed rate.
₹59.00 Incl TaxLM7805 Linear Voltage Regulator – 5V With Heat Sink
₹59.00 Incl Tax
PVC Hose Pipe for Small DC Submersible Pump
This is a PVC Hose Pipe for Small or medium DC Submersible Pump. Available in 1 meter, & 2 meters length. Pipe with a diameter of 8mm (Perfectly fit for DC Submersible pumps).
₹60.00 – ₹99.00 Incl TaxPVC Hose Pipe for Small DC Submersible Pump
₹60.00 – ₹99.00 Incl Tax
Mini Breadboard – 170 Tie Points
This 170 pts Mini Breadboard SYB-170 Green is best for your small Arduino Projects. The 170 pts breadboard is named for its 170 tie points. It has 17 columns of 10 holes, which are separated into two pairs by a central notch, and labelled 1 to 17. It comes with the adhesive back for easy attachment with the application. They’re useful for basic prototyping. They are the modern breadboards, a plug-and-play way to make connections between electronic components.
₹60.00 Incl TaxMini Breadboard – 170 Tie Points
₹60.00 Incl TaxMT3608 2A Max DC-DC Step Up Power Module
The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
₹60.00 Incl TaxMT3608 2A Max DC-DC Step Up Power Module
₹60.00 Incl Tax
