• 4 Channel 5V Relay Module

    01

    This is a 5V 4-Channel Relay interface board, be able to control various appliances and other equipment with large current. It can be controlled directly by Microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

    199.00 Incl Tax

    4 Channel 5V Relay Module

    199.00 Incl Tax
  • 4 Motors Metal Chassis

    4 Wheel Metal Chassis is powder-coated Metal chassis for robots. Easy to mount the motors on the place by using normal motor mount nut. It is compatible with a centre Shaft Gear motor and BO Motor. This Chassis board is widely used as a  mechanical frame structure of the mobile robots. It is the backbone of the robot, where we arrange and connect everything like BO Motors, sensors, and BO Wheels.

    199.00 Incl Tax

    4 Motors Metal Chassis

    199.00 Incl Tax
  • 400 Tie Points Mini Solderless Breadboard

    400 Tie Points – Solderless Breadboard is a high-quality breadboard with power lanes and printed top face for easy prototyping. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. It is Reusable for fast build a prototype of an electronic circuit – will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components – No soldering required.

    99.00 Incl Tax
  • 5V Cooling Fan for Raspberry Pi – Bolt & Nuts Included

    This is a 5V Cooling Fan for Raspberry Pi with Mounting Bolt & Nut. Use this compact 5V fan to keep your projects cool. It is very easy to install and uninstall with easy mounting and Connector to connect onboard. This fan can be directly connected to Raspberry Pi pins 4 and 6.

    199.00 Incl Tax
  • 9V DC Power Adapter (1A)

    The best quality and durable power adapter. 9V Power Supply with 5.5mm DC Plug Adapter is 2 pin EU plug type adapter and 1 meter long connecting cable. These adapters are designed to meet all types of power requirements for any type of electronic components. (Available in two current variant 1A and 2A).

    190.00 Incl Tax

    9V DC Power Adapter (1A)

    190.00 Incl Tax
  • Acrylic Case For 16×2 LCD Module (Transparent)

    02

    This is LCD Display 16×2 LCD1602 Holder Acrylic Case Stand Module. This transparent acrylic case is strong and handy. Give your LCD screen a rightful throne. This stylistic holder will surely give your project an aesthetic boost. Material: Acrylic, Colour: Transparent, Compatibility: LCD 1602 (16×2 Module).

    149.00 Incl Tax
  • ADXL335 Triple Axis Linear Accelerometer

    The ADXL335 is a small, thin, low power, a complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.

    459.00 Incl Tax
  • ADXL345 Triple Axis Linear Accelerometer Sensor

    The ADXL345 Tripple Axis Accelerometer sensor is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.

    190.00 Incl Tax
  • AMS1117 3.3V DC Power Supply Module

    This power supply module is based on the AMS1117 5V regulator. It is capable of regulating a wide range of input voltage (6.0 to 12V) down to a fixed 5V output at up to 1A  Standard 0.1″ header pins provide a means of connecting to its input and output terminals.

    65.00 Incl Tax
  • AMS1117 5V DC Power Supply Module

    This power supply module is based on the AMS1117 5V regulator. It is capable of regulating a wide range of input voltage (6.0 to 12V) down to a fixed 5V output at up to 1A  Standard 0.1″ header pins provide a means of connecting to its input and output terminals.

    65.00 Incl Tax
  • Arduino Nano – With Cable (Clone)

    02

    The Nano R3 with USB Cable chipboard is based on the famous Arduino platform and does all the functions of Arduino UNO, but with a smaller footprint. The Nano R3 is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good. It can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

    469.00 Incl Tax
  • Arduino Nano Clone – Without Cable

    02

    The Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality as the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. It can be power via the mini-USB connection, 6-20V unregulated external power supply, or 5V regulated external power supply. The power source is automatically selected to the highest voltage source.

    410.00 Incl Tax

Menu Section

Delhivery Shipping Service

Your tracking ID will be sent to your registered email address and via SMS. You can also use your order ID for tracking.

Shiprock Shipping Service

Your shipment details will be sent to your registered email and SMS or use your Order ID to track the live status of your shipment.