No products in the cart.
Arduino UNO Clone – With USB Cable
Roll over image to zoom in
Click to open expanded view
₹699.00 Incl Tax (-29%)
The clone Arduino Uno with Cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to power with an AC-to-DC adapter or battery to get started.
- Microcontroller: atmega328.
- Operating Voltage: 5V.
- Input Voltage (Vin) : 7-12V.
Special Discount! This promotion will expires in
The Uno clone can be a program with the Arduino software download or code online using online IDE. The ATmega328 on the Uno R3 comes pre-burn with a bootloader that allows you to upload new code to it without using an external hardware programmer. You can also avoid the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header.
Mode of Power Supply: USB Connector & External Power Supply.External Power Supply.
External power can come either from an AC-to-DC adapter or battery. For battery connection leads from a battery are to be inserted in the GND & Vin pins of the board.
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, the 5V pin may supply less than five volts, and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
The ATmega328 has 32 KB with 0.5 KB used for the bootloader and 2 KB of SRAM and 1 KB of EEPROM, which can be read and written with the EEPROM library.
All the pictures on our website are for illustration purposes. Original products may be different but with the same specification as per description.
- 1 – Arduino Uno Clone
- 1 – USB Cable
THIS IS A CLONE MODEL. NOT THE ORIGINAL ONE.
|Model Type||UNO Rev R3|
|Operating Voltage (VDC)||5|
|Input Voltage (limit)||6-20V|
|Analog I/O Pins||6|
|Digital I/O Pins||14 (of which 6 provide PWM output)|
|PWM Digital I/O Pins||6|
|DC Current per I/O Pin (mA)||40|
|DC Current for 3.3V Pin (mA)||50|
|Clock Speed||16 MHz|
|EEPROM||1 KB (ATmega328)|
|Flash Memory||32 KB|
|On-Board LEDs||On/Off, L (PIN 13), TX, RX|
5 Days Replacement
This item is covered with a standard replacement of 5 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of iTElectronicscomp’s customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids the warranty?
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.