Arduino UNO Clone – Without Cable
₹550.00 Incl Tax
The Arduino Uno clone without cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analogue inputs, a USB connection, a power jack. It contains everything needed to support the microcontroller; connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Buy with USB CableBuy with USB Cable.
Mode of Power Supply: USB Connector & External Power Supply.External Power Supply. External power can come either from an AC-to-DC adapter or battery. For battery connection leads from a battery are to be inserted in the GND & Vin pins of the board.
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, the 5V pin may supply less than five volts, and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
The ATmega328 has 32 KB with 0.5 KB used for the bootloader and 2 KB of SRAM and 1 KB of EEPROM, which can be read and written with the EEPROM library.
Memory: The ATmega328 has 32 KB with 0.5 KB used for the boot-loader and it also has 2 KB of SRAM and 1 KB of EEPROM, which can be read and written with the EEPROM library.
Input and Output: Each of the 14 digital pins on the Uno R3 can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each PIN can provide or receive a maximum of 40 mA and has an internal pull-up resistor of 20-50 k-Ohms.
Overcurrent Protection: The Uno R3 has a resettable poly fuse that protects your computer’s USB ports from shorts and overcurrent. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. The fuse will automatically break the connection it gets more than 500mA on the UBB port.
The image on our website is subjected to illustration propose product may be different but with the same specification as per our description. Amazon ASIN: B06XBMB9T1
- 1 – Arduino Uno Clone (Not Original).
THIS IS THE CLONE MODEL. NOT THE ORIGINAL.
|Model Type||UNO Rev R3|
|Operating Voltage (VDC)||5|
|Input Voltage (limit)||6-20V|
|Analog I/O Pins||6|
|Digital I/O Pins||14 (of which 6 provide PWM output)|
|PWM Digital I/O Pins||6|
|DC Current per I/O Pin (mA)||40|
|DC Current for 3.3V Pin (mA)||50|
|Clock Speed||16 MHz|
|EEPROM||1 KB (ATmega328)|
|Flash Memory||32 KB|
|On-Board LEDs||On/Off, L (PIN 13), TX, RX|
5 Days Replacement
This item is covered with a standard replacement of 5 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of iTElectronicscomp’s customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids the warranty?
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.