MT3608 2A Max DC-DC Step Up Power Module

60.00 Incl Tax

Only 1 left in stock (can be backordered)

The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.

SKU: 09297 Categories: , ,

This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings. Since it is a boost converter, the input voltage must be lower than the output voltage.

The device is able to use low ESR bulk ceramic capacitors rather than electrolytic caps which avoids long-term aging concerns and contributes to the compact packaging.

The MT3608 converter IC has over-current and thermal limiting features built-in to safely shut the device down if driven too hard.

Voltage Adjustment

The module has a single-turn potentiometer for adjustment of the output voltage. Turning the pot CW decreases the output voltage while turning it  CCW increases the output voltage.

The upper limit of the adjustment range will depend on the input voltage and the load.  With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.

Module Connections

These are compact boards with 4 solder pads for making connections.

  • VIN+ =      Input Voltage
  • VIN- =       Ground
  • VOUT+ = Output Voltage
  • VOUT- =  Ground.  Connected to VIN- on the module.

Features

  • It’s efficient by up to 93%.
  • It can source a good amount of current.
  • It is an inexpensive converter module.
  • It’s simple to adjust to get your desired increase in voltage.

Package Include

  • 1 –  MT3608 2A Max DC-DC Step Up Power Module Booster.
Input Voltage 2 ~ 24 V
Max. Output Current 2 A
Operating Temperature -40 to 90 °C
Efficiency 93%
Length 37 mm
Width 17 mm
Height 7 mm

5 Days Replacement

This item is covered with a standard replacement of 5 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of iTElectronicscomp’s customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects only.


What voids the warranty?

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Menu Section

MT3608 Module

MT3608 2A Max DC-DC Step Up Power Module

60.00 Incl Tax

Add to Cart
Delhivery Shipping Service

Your tracking ID will be sent to your registered email address and via SMS. You can also use your order ID for tracking.

Shiprock Shipping Service

Your shipment details will be sent to your registered email and SMS or use your Order ID to track the live status of your shipment.