TP4056 1A Li-ion Charging Module – With Current Protection (Micro USB)

80.00 Incl Tax

In stock

This TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.

Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

Manufactured under fully machinery processing. Each module is tested OK before shipment from our warehouse so it has high reliability for the best performance. In conclusion, it is special design for a single lithium battery charging. TP4056 Other features include the current monitor, under-voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage.

Using The TP4056 Module:

  • Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
  • Connect cell to charge to B+/B- pads on the right-hand side of the module.
  • A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
  • Important! Disconnect load when charging
  • The red LED indicates charging in progress, the green LED indicates charging has finished.
  • Never charge your battery at a rate greater than 1C.

Features:

  • Led indicator: red is charging Green is fully charged.
  • Current Protection: Yes
  • Inversed polarity: NO.
  • Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  • Fully machinery automated processing, all patch parts manufacturing.

Other Popular Products:


Package Contains:

1 – TP4056 1A Li-ion Battery Charging Module – Micro USB With Current Protection.

Charging accuracy 1.5 %
Charging method Linear
Full Charge Voltage 4.2 V
Over-Current Protection 3 A
Under-Voltage Protection 2.5 V
Input Voltage 4.5-5.5 V
Rated Power 4.2 W
Operating Temperature -10 to 85 °C
Length 25 mm
Width 20 mm
Height 6 mm

5 Days Replacement

This item is covered with a standard replacement of 5 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of iTElectronicscomp’s customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects only.


What voids the warranty?

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Be the first to review “TP4056 1A Li-ion Charging Module – With Current Protection (Micro USB)”

Reviews

There are no reviews yet.

Menu Section

TP4056 Micro USB Module

TP4056 1A Li-ion Charging Module - With Current Protection (Micro USB)

80.00 Incl Tax

Add to Cart
Delhivery Shipping Service

Your tracking ID will be sent to your registered email address and via SMS. You can also use your order ID for tracking.

Shiprock Shipping Service

Your shipment details will be sent to your registered email and SMS or use your Order ID to track the live status of your shipment.